本页面标准信息均来源于网络收集，或由参与标准制定的供应商提供，只作为参考使用，为确保测试结果的准确性、节省您的时间，如需SAE J1127-2005标准详细信息或SAE J1127-2005具体测试方法，欢迎致电与我们技术人员联系或给我们留言，我们将为您相关的技术支持。
SAE J1127简介
SAE J1127是关于车辆电气系统低压60伏直流电压(25伏交流电)或更小的电池电缆表面的测试标准。该试验的目的是确保电线电缆符合要求。以下为部分英文标准原文，出于版权保护，如需SAE J1127标准全文或SAE J1127中文版本标准，请垂询客服人员。
1. Scope
This SAE Standard covers low tension battery cable intended for use at a nominal system voltage of 60 V DC (25 V AC) or less in surface vehicle electrical systems. The tests are intended to qualify cables for normal applications with limited exposure to fluids and physical abuse.
2. References
2.1 Applicable Publications—The following publications form a part of this specification to the extent specified herein. Unless otherwise indicated, the latest issue of SAE publications shall apply.
2.1.1 SAE PUBLICATIONS—Available from SAE, 400 Commonwealth Drive, Warrendale, PA 15096-0001.
SAE EA-1128—Wire Color Charts
SAE J311—Fluid for Passenger Car Type Automatic Transmission Dictionary of Materials and Testing
2.1.2 ASTM PUBLICATIONS—Available from ASTM, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.
ASTM B 33—Standard Specification for Tinned Soft or Annealed Copper Wire
ASTM B 174—Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors
ASTM B 263—Method for Determination of Cross-Sectional Area of Standard Conductors
ASTM B 298—Standard Specification for Silver-Coated Soft or Annealed Copper Wire
ASTM B 354—Definitions of Terms Relating to Uninsulated Metallic Electrical Conductors
ASTM B 355—Standard Specification for Nickel-Coated Soft or Annealed Copper Wire
ASTM D 412—Standard Test Methods for Vulcanized Rubber and Thermoplastic Rubbers and Thermoplastic Elastomers—Tension
ASTM D 471—Standard Test Method for Rubber Property—Effect of Liquids
ASTM D 573—Standard Test Method for Rubber —Deterioration in an Air Oven
ASTM E 145—Standard Specification for Gravity—Convection and Forced-Ventilation Ovens
ASTM F 1251—Standard Terminology Relating to Polymeric Biomaterials in Medical and Surgical Device
2.1.3 IEC PUBLICATION—Available from ANSI, 11 West 42nd Street, New York, NY 10036-8002.
IEC—Electricity, Electronics and Telecommunications, Multilingual Dictionary
2.2 Related Publications—The following publications are provided for information purposes only and are not a required part of this specification.
2.2.1 SAE PUBLICATIONS—Available from SAE, 400 Commonwealth Drive, Warrendale, PA 15096-0001.
SAE J156—Fusible Links
SAE J1067—Seven Conductor Jacketed Cable for Truck Trailer Connections
SAE J1128—Low Tension Primary Cable
SAE J1292—Automobile, Truck, Truck-Tractor, Trailer, And Motor Coach Wiring
SAE J1654—High Voltage Primary Cable
SAE J1673—High Voltage Automotive Wiring
SAE J1678—Low Voltage, Ultra Thin Wall Primary Cable
2.2.2 ASTM DOCUMENTS—Available from ASTM, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.
ASTM B 1—Standard Specification for Hard-Drawn Copper Wire
ASTM B 3—Standard Specification for Soft or Annealed Copper Wire
ASTM B 8—Concentric-Lay-Stranded Copper conductors, Hard, Medium-Hard, or Soft
ASTM B 787—19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation
2.2.3 IEC PUBLICATION—Available from ANSI, 11 West 42nd Street, New York, NY 10036-8002. IEC 811-2-1—Common test methods for insulating and sheathing materials of electrical cables—Part 2: Methods specific to elastomeric compounds—Section 1: Ozone resistance test—Hot set test—Mineral oil immersion test.
2.2.4 ISO DOCUMENTS—Available from ANSI, 11 West 42nd Street, New York, NY 10036-8002. ISO 6722—Road vehicles—Unscreened 60 V and 600 V single core cables—Test methods, dimensions and requirements
ISO 14572—Road vehicles—Round, unscreened, 60 V and 600 V multicore sheathed cables—Basic and high performance test methods and requirements
